Newomics® Starter Kit (SKIT-T01) interfaces with Thermo Scientific™ Nanospray Flex™ series ion sources including the Flex (ES071) and Flex NG (ES072), in conjunction with Thermo Scientific™ mass spectrometers.
The Newomics Starter Kit includes the following:
The Newomics Starter Kit includes:
- 2 M3 Emitters
- 1 M3 Emitter housing, includes:
- Dummy M3 Emitter
- High Voltage (HV) Connector
- 2 Ion Sources Adapters:
- Nanospray Flex NG Source Adapter
- Nanospray Flex Source Adapter
- 1 USB Drive, includes:
- Technical Videos (with/without captions) – Start here to begin installation
- User and Troubleshooting Guide
- VICI Adapter Manual
- Terms & Conditions
- 1 NanoViperTM Tubing
- 2 PTFE Gas Tubing (1/4″ OD and 1/8″ OD, 5ft)
- 1 VICI Fitting
- 1 Bag of Spare Parts (3 backup screws and 1 housing O-ring)
- 1 Torque Screwdriver with the nanoViper™ Adapter
- 1 Screwdriver Adapter for Evosep NanoConnect
- 1 Gas Flow Meter (Max. 5 L/min)
- 1 Gas Regulator (max. 300 psi)
Note: The inlet of the flow meter is already connected to the outlet of gas regulator via the 1/8″ OD tubing in the kit.
- 1 Grounding Unit with a low-dead-volumne union.
For more information on Newomics, click here.